Enigma2 for DM500
Consiste nel filesystem Linux root
l'immagine del kernel può essere utilizzato sia dal flash o caricate usando TFTP / BOOTP.
Estrarre il contenuto del pacchetto in una directory esportata (per esempio "/ tftpboot/dm500-e2") sul computer server NFS
Avviare il dreambox con una connessione seriale (115200, 8, n, 1) a un PC abilitato
Backspace Hit a "il boot loader di carico PPC" pronta e procedere con una delle seguenti configurazioni.
Semplice configurazione dei parametri del kernel init, solo NFS export / tftpboot sul server 192.168.0.1:
ip = 192.168.0.2:192.168.0.1:192.168.0.100:255.255.255. 0::: off root = / dev / nfs rw nfsroot = 192.168.0.1: / tftpboot/dm500-e2, v3, nolock console = ttyS0, 115200 tranquilla
Kernel i parametri di configurazione avanzata init, con DHCP + server BOOTP
root = / dev / nfs rw ip = dhcp console = ttyS0, 115200 tranquilla
********************************************************************
Enigma2 port for DM500. Consists of the linux root filesystem,
the kernel image can be either used from the flash or loaded using TFTP/BOOTP.
Extract the contents of the package to an exported directory (e.g. "/tftpboot/dm500-e2") on the NFS server PC.
Boot your dreambox with a serial connection (115200, 8, n, 1) to a PC enabled.
Hit backspace at the bootloader's "PPC load"-prompt and proceed with one of the following setups.
Simple setup kernel init parameters, only NFS export /tftpboot on server 192.168.0.1:
ip=192.168.0.2:192.168.0.1:192.168.0.100:255.255.255.0::ff root=/dev/nfs rw nfsroot=192.168.0.1:/tftpboot/dm500-e2,v3,nolock console=ttyS0,115200 quiet
Advanced setup kernel init parameters, with DHCP + BOOTP server:
root=/dev/nfs rw ip=dhcp console=ttyS0,115200 quiet