Benvenuto su . Clicca qui per Registrarti

Oggi è gio 28 mar 2024, 13:15


Benvenuto su Ospite! Iscriviti  Oppure effettua il  Login

Informazione:

Come per X 405 X 406 [al server di set-up]

Moderatori: GioTag, filolau

Come per X 405 X 406 [al server di set-up]

Messaggioda Ghost » dom 7 set 2014, 11:23

1. mettere la scheda nello slot lettore.
2. utilizzare SW. speciale, premere F1 + 111, attivare internet
3. Vai al Menu / espansione / IP Settings per impostare un indirizzo IP. Consigliabile impostare manualmente IP, sarà evitare di affrontare il cambiamento dopo riavviare il router. Ricordate il vostro IP del server.
AVVERTENZA! Quando si utilizzano più X 405 X 406 in una rete LAN, potrebbe essere necessario cambiare l'indirizzo MAC.
È possibile che tutti i ricevitori avrà lo stesso indirizzo MAC, e causerà conflitto. È importante. Cambiare indirizzo MAC semplicemente cliccando su di esso.
Prime 4 cifre non sono modificabili, resto di cifre sono modificabili.
4. nel menu di impostazione IP, c'è anche posizione porta interna. Ricordate questo valore.

****************************************************
How to for X405 X406 [To set-up server]
1. Put card in card reader slot.
2. Use special sw., press F1+111, enable internet
3. Go to Menu/ Expansion/ IP setting to set IP address. Recommended to set IP manually, it will avoid address change after your router restart.
Remember your server IP.
Warning! When using more X405 X406 in one LAN network, you might need to change MAC address.
It is possible that all receivers will have the same MAC address, and it will cause conflict. It is important.
Change MAC address by simply clicking on it. First 4 digits are not editable, rest of digits are editable.
4. Also in IP setting menu, there is position INTERNAL PORT. Remember this value.
Avatar utente
Ghost
Founder
Founder
 
Messaggi: 9956
Iscritto il: sab 19 apr 2014, 9:25
Località: Toscana
Has thanked: 270 times
Been thanked: 331 times

Torna a Manuali

cron
//