NCam 5.0-r1 (Oficial) 100320

[michele01]

NCam 5.0-r1 (Oficial) 100320

Changelog:

OFFICIAL version
NCam cardserver v5.0-r1, ( MIPS, PPC, X86, X86_64, SH4, ARM, EXE )

Changelog v4.9-r1:
- cak7 - fix caid 0000 and all other known issues
- Fix ecm CAID 0100
- no config change required
- patch provided by @pehedima
- Patch Allow 0 fallback readers in loadbalancer (By Mic)
- more generalized routing info in cw msg

Compiled:

ncam.mips Enigma2 - Mipsel (Gigablue, Dream, Vu+, Xtrend, Formuler...).
ncam.mips-uclibc Enigma2 - Mipsel (Tiviar Plus 'firmware no enigma2', and similar).
ncam.x86 Linux PC (32 bit - i686).
ncam.x86_64 Linux PC (64 bit).
ncam.x86_64-syn_atom Linux x86_64 (For Synology ATOM 64 bit).
ncam.ppc Enigma1 - (Power PC - DM600, 7000, 7020, 7020si...).
ncam.ppc-old Enigma1 - (Power PC OLD - DM500, 500S, DBox2...).
ncam.sh4 Enigma2/Spark sh4 - (Golden Media, Galaxy Innovations, Amiko...).
ncam.cortexa9hf-vfp-neon Enigma2 - (Cortex-A9 - Wetek, Vu+4K, Octagon 4k and similar).
ncam.arm-raspbian ARM (Raspberry pi 3, Prismcube, TInkerboard and other similars).
ncam.arm-android ARM (For Android ARM (API 24+)).
ncam.arm-marvell ARM (Synology Armada 375 and similar).
ncam.arm-armada37xx ARM (Synology Armada 37xx).
ncam.arm-mca ARM (For Matrix CAM Air).
ncam.arm-samsungtv ARM (For Samsung TV).
ncam-router.mips Routers (Routers MIPSEL DD-WRT).
ncam.router-openwrt-brcm47xx.mips Mips (Routers openwrt brcm47xx).
ncam.router-openwrt-ar71xx.mips Mips (Routers openwrt ar71xx).
ncam.router-openwrt-brcm63xx.mips Mips (Routers openwrt brcm63xx).
ncam-x86_64-pc.exe Windows PC (64-bit) (You Need DLL cygwin1.dll in C:\Windows\System32).
ncam-i686-pc.exe Windows PC (32-bit) (You Need DLL cygwin1.dll in C:\Windows\System32).


Ncam settings web::

Ncam Admin Control: 127.0.0.1:8181/ (192.168.x.x or host-xx.org)
user: root
password: ldteam

Important: Change xxxxxxxxxx (0-9 and A-F) on the NodeID. (Important to respect all 16 characters.

Change serverip (CCcam) 192.168.xx.xx for the ip of the receiver.

Config: /var/tuxbox/config
SoftCam.Key: /var/tuxbox/config

SoftCam.Key Not included!!
The emulator is inactive for default.